Solving the AROEVE Air Purifier Red Light: A Simple Step-by-Step Guide

Are you having trouble with your AROEVE Air Purifier red light? Now, you need to learn how to turn it off.

Well, have a look at our 2-minute post to solve this issue.

1. What does the red light on an Aroeve air cleaner mean?

The red light on the AROEVE purifier indicates that it is time to change the filter. Filters clean the air by catching dust, pollen, pet hair, and other particles that can cause respiratory problems.

AROEVE smart filters have a built-in timer that uses a red flashlight to Medicare that needs to be cleaned or changed. Normally, it happens after about 2,000 hours of use. When the red light blinks, you need to change or clean your AROEVE purifier’s air filter to let it work at its best!

2. How to turn off the red light on an air purifier by resetting 

Let’s solve this problem of resetting to make it easy and quick.

Step 1: Turn off and unplug the device.

  • Before changing the filter, press the power button to turn off your air purifier. 
  • It is important to make sure the purifier is turned off by unplugging the power line.

Step 2: Take out the old filter.

  • On most AROEVE models, the filter cover is located on the bottom or back of the unit.
  • To open and take off the top, turn it counterclockwise.

Step 3 is to clean the sensor, housing, and slot.

  • Use a dry cloth to clean the empty filter box.
  • For MK04, ensure the top sensor is clean to increase its efficiency.

Step 4: Place the Replacement in the Right Direction.

  • Make sure that the airflow direction arrow on the filter corresponds to the air purifier consumption.

Step 5: Close Up the Housing

  • In this step, you need to close the air purifier’s housing.

Step 6: Reset the indicator light.

  • Turn on your filter after plugging the power cord back into the circuit.
  • Press and hold the reset button for five seconds.
  • This resets the red light filter timer and starts the filter timer over again.
  • Then, the light should turn blue, meaning your air filter is ready to clean the air.
  • That’s it! The problem with the red light has been fixed. Remember to change the filter frequently to keep your AROEVE air purifier working well and improve your house’s air quality.
Troubleshooting AROEVE Air Purifier After Changing the Filter

3. Troubleshooting AROEVE Air Purifier After Changing the Filter

If the light stays on after changing the filter, then follow this method to fix the problem:

1) Impacts from Outside

  • Sometimes, the AROEVE Air Purifier shows a red light because of outside damage. If you don’t want to damage the AROEVE air purifier, keep it away from other equipment like heaters, humidifiers, and dehumidifiers.

2) Try to reset it again

  • Make sure you hold down the reset button for 5 to 10 seconds.
  • To successfully reset the device, try holding it down full-time if necessary.

3) Perform a power reset.

  • Turn off the power and leave it unplugged.
  • Plug in, turn on, and press the power button for thirty seconds until the blue light flashes.

4) Inspect the New Filter as Step Four

  • Carefully remove the new filter and examine it in great detail.
  • Make sure it is placed correctly and that it is not damaged.

5) Remove any obstructions that may be present

  • Have a look at the housing of the filter for any blocks.
  • You can use a brush or a cotton swab to remove clogs.

6) Make Calls to Support

  • After following every step carefully and watching that the AROEVE Air Purifier’s red light is still on, call AROEVE Customer Support and seek assistance.

If you’re patient, you can fix any problems, even this annoying AROEVE Air Purifier red light problem. Lastly, please feel free to get in touch if you need more help. Have fun cleaning up!

Step-by-Step Guide to Clean AROEVE Air Purifier Filter

Step-by-Step Guide to Clean AROEVE Air Purifier Filter

Maintenance of the AROEVE Air Purifier filter is important for its longevity and performance. Check your AroEve Air Purifier manual instructions before cleaning it. Some models have special methods or solutions. General AROEVE filter cleaning instructions:

  1. Turn Off: Unplug your AROEVE Air Purifier from the electricity.
  2. Open Filter: Look at the position where the filter will be opened.
  3. Take Out Filter: Remove the filter that needs cleaning.
  4. Check Filter: Look at the dirt or damaged part.
  5. Vacuum Filter: Use a handheld vacuum to clean loose dirt and dust particles.
  6. Wash Filter (if possible): If your filter is washable, wash it with lukewarm water.
  7. Let Dry: Leave the filter to air dry in a breezy spot.
  8. Put Filter Back: After it dries put it back carefully.
  9. Reset Reminder: If needed, reset any reminder lights or indicators.
  10. Test: Plug your purifier back in and turn it on to ensure it works well.

Safety Steps

  • Regular Cleaning is important to keep your air purifier working well. Wipe the air purifier with a moist cloth to keep it clean.
  • Read the user handbook to understand all indication lights and functions.
  • If the filter has reached its maximum life, replace it before the red light.

Frequently Asked Questions

The red light means you need to clean or get a new filter.

Turn it off and unplug it, remove the old filter, clean the sensor and inside, put in a new filter, close it up, and press the reset button for five seconds to turn off the light.

Look for any damage, reset it again, turn the power off and on, check the new filter, make sure nothing is blocking it, and call for help if needed.

Changing the filter every 2,000 hours or if it looks dirty is good to keep the cleaner working right.

Don’t put the air cleaner near heaters or humidifiers to stop the red light from wrongly coming on.

If you have problems, you can ask for help from AROEVE Customer Support.

Conclusion

When your AROEVE air purifier’s red light comes on, most of the time, the filter is likely to blame. This means you need to change the filter to keep the air fresh. Resetting the purifier, power reset, or checking for clogs are the ways to fix this problem. If none of these methods work, we suggest you contact customer support. These methods are used to restore your air purifier to its best performance.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *